Fender Flares Information and Installation
Our fender flares are made of high-pressure, injected
plastic. This makes them light, but durable.
They are easy to install and can be painted to match the
color of your truck if you do not want black.
Universal Fitting Instructions for Fender Flares
PLEASE READ THESE
INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION
Important Note: Please, inspect your fender flares for
proper fit BEFORE painting or mounting!
Installation
Instructions
Hardware Kit: (Supplied on each set of fender
flares)
Self-Tapping Screws = 1 Package
Tools Required:
1/8" Diameter Drill Bit
Phillips Screwdriver
Fender Flares
Installation
| 1. |
Test fit the fender flares on the vehicle. |
| 2. |
Wet a soft cloth or tissue paper with alcohol or
a cleaning solvent and clean the entire surface
which will be taken up by the double-sided adhesive
tape. (See Illustration 1, area marked xxx) |
| 3. |
Peel about 2" of the vinyl backing away from one
end of the double-sided adhesive tape (See
Illustration 2). Pulling the vinyl backing
free and apply from pressure to obtain a good
adhesion. Do not wash the vehicle until 24
hours have past. |
| 4. |
Use a 1/8" diameter drill bit or the provided
self-tapping screw and attach the flare at the
various points (See Illustration3). |
 |
